Table of Contents
Advertisement
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Attach the fan module.
a. Carefully insert the fan module at an angle into the slot at the bottom of the chassis.
Warning
Do not push the fan module into the slot by force. Doing so can damage the memory modules
on the system board.
b. Tilt the top of the fan module toward the system board to latch the fan module to the system
board.
c. Attach the screw that secures the fan module to the system board.
d. Connect the power connectors of all fans to the system board.
TS-1655 User Guide
Installation and Configuration
39
Advertisement
Table of Contents
