Pre-Position Mapping - Bosch NDP-5512-Z30C User Manual

38 en | Camera
10. To view a pre-position in the preview window, select the pre-position in the list and click
11. To view a pre-position from the Live page:
To define a Pre-position Tour:
1.
2.
3.
4.
5.
6.16

Pre-position mapping

Pre-position mapping allows you to map a function to a pre-position action. This feature works
for Bosch protocols and for non-Bosch protocols.
Action
Select the appropriate action: Show or Set.
Pre-position
Enter the number of the pre-position to map.
Function
Select the appropriate function from the drop-down list.
Start auto pan
Start auto pan with limit
Stop auto pan
Start custom tour
Stop custom tour
Start tour
Stop tour
Start playback A
Stop playback A
Start playback B
Stop playback B
Compass on
2019-11 | 1.2 |
– Click the button Overwrite pre-position (disk icon) to apply the new pre-position to
the existing pre-position.
– To change the name of the pre-position, double-click the pre-position in the list.
Then, change the name in the dialog box Edit Pre-position and click OK.
the button Show pre-position (eye icon).
– Click a pre-position number in the list Pre-positions.
OR
– Use the keypad and the button Show pre-position in AUX Control.
Create the individual pre-positions.
By default, all scenes in the list Pre-positions are in the Pre-position Tour.
To remove a pre-position from the tour, select the pre-position in the list and uncheck the
box Include in standard tour (marked with *).
Select a dwell time from the drop-down list Standard pre-position tour.
To start the Pre-position Tour:
Return to the Live page.
Click AUX Control.
Type 8 in the input box and click AUX on.
To stop the tour, type 8 and click AUX off.
Gamma mode off
Gamma mode smart 1
Gamma mode smart 2
Gamma mode smart 3
IR focus correction on
IR focus correction off
OSD feedback on
OSD feedback off
IR mode on
IR mode off
IR mode auto
Visible light on
User Manual
AUTODOME IP starlight 5000i
Bosch Security Systems