Adjusting the flame on the dual work burner
High
Both rings
1 Always start out on High. Both rings of
flame will be on in the shaded setting
range.
Note: when turned all the way down,
the flame on the outer ring may appear
to come and go. If this occurs, adjust
the dial slightly back towards High for a
stable outer ring.
Wok cooking
Use your wok only on the wok burner (dual or mini, depending on model) and with the
supplied wok stand in place, as shown.
IMPORTANT!
Make sure that the wok stand is stable: its notches need to fit tightly over the pan
●
●
supports, as shown.
Make sure the wok does not push any other pans aside. This could make them
●
●
unstable, or deflect heat onto nearby walls or the benchtop.
USING YOUR COOKTOP
Low
2 To use the inner ring of flames only,
High
continue turning the dial towards Low.
Only the inner ring will be on in the
shaded setting range.
Dual wok burner illustrated
Low
Inner ring only
EN
11