User's Manual; Editor's Note; Page Format - Omron ZFV Series User Manual

Editor's Note

Page Format

Index label
Indicates the section number and title.
Section 3
Setting Banks
Setting Banks
The ZFV Series can hold up to eight sets of settings. These settings can be switched
externally when changing the device setup
A set of these settings is called a "bank."
Switching banks
BANK 1 is selected as the default. BANK 2 and 8 are also available.
BANKs can also be switched from an external device.
Setting the bank switching method
MENU mode-[BANK]
Setting
BANK 1~BANK 8 Selects the target bank.
(default value: BANK 1)
Copying banks
Copy the settings of other bank numbers to an already selected bank number.
MENU Mode-[SYS1]-[BANKSET]-[COPY]
Clearing banks
"Clearing" deletes the settings of the currently selected bank number.
MENU Mode-[SYS1]-[BANKSET]-[CLEAR]
[SYS1], [SYS2] settings and RUN Mode display settings cannot be cleared.
Setting the bank switching method
Select how to switch banks.
MENU Mode-[SYS1]-[BANKSET]-[SWITCH]
Setting
KEY (default value) Banks are switched by the control keys on Amplifier Unit.
I/O Banks are switched by the control keys on Amplifier Unit and input lead sig-
nals.
Switching by input lead signals is enabled only in the RUN mode.
ZFV
60

User's Manual

Supplementary Explanation
p.60
Description
Description
Introduction
Precautions for Correct Use
Title of each section
Header
Overview
Cross-header
Overview of the
cross-header
Movement through
menus up to setting
items
Explanation of options
User's Manual
ZFV
7