Table of Contents
Advertisement
Customizing Measurement conditions
The display items from [CUSTM] onwards differ according to the teaching type set at
[ITEM].
Common items
■ Adjusting light emission
Adjust the intensity of the light emitted from Sensor Head.
The light intensity of each adjusted section is displayed as a 4-digit number.
Top surface (model printed surface)
An image of how light is emitted is displayed on screen.
Adjust the light intensity by the UP/DOWN keys.
Setting
0 to 5 (default value: 5)
MENU Mode-[CUSTM]-[LIGHT]
1.
Switch the light intensity by the UP/DOWN keys.
When performing partial adjustment
• LEFT/RIGHT keys: Select the adjustment section.
• UP/DOWN keys: Select the light intensity.
2.
Press the SET Key to apply the setting.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Customizing Measurement conditions
View from
here
The light intensity can also be adjusted
partially (A to D).
0: Out, 1 to 5: Light intensity increases the larger the number.
Section 3
Description
User's Manual
ZFV
65
Advertisement
Table of Contents
