Removing The Lower Triple Clamp; Installing The Lower Triple Clamp - KTM 250 SX-F 2023 Owner's Manual

11.9

Removing the lower triple clamp

11.10

Installing the lower triple clamp

Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove front fender. (
–
Take off the handlebar cushion.
Main work
–
Remove screw
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and place
to one side.
Info
Cover the components to protect them against damage.
S05332-10
Do not kink the cables and lines.
–
Remove the steering head seal
–
Remove the lower triple clamp with steering stem.
–
Remove the upper steering head bearing.
S05333-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Push on the steering head seal
F03661-10
SERVICE WORK ON THE CHASSIS 11
( p. 93)
( p. 51)
p. 57)
p. 57)
1
. Detach the wiring harness.
2
.
3
.
4
.
p. 141)
1
.
p. 49)
53