Removing The Fork Protector; Installing The Fork Protector; Removing The Fork Legs - KTM 250 SX-F 2023 Owner's Manual

11.5

Removing the fork protector

11.6

Installing the fork protector

11.7

Removing the fork legs

Universal oil spray (
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
Remove screws
–
Remove screws
–
Remove screws
S05329-10
–
Position the fork protector on left fork leg. Mount and tighten
1
screws .
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
screws 2 .
–
Position the fork protector on the right fork leg. Mount and
tighten screws
S05329-11
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove screws
–
Allow the brake caliper and the brake line to hang loosely to
the side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
S05330-10
SERVICE WORK ON THE CHASSIS 11
p. 142)
p. 51)
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
M6 10 Nm (7.4 lbf ft)
3
.
M6 10 Nm (7.4 lbf ft)
( p. 93)
1
and take off the clamp.
2
and take off the brake caliper.
p. 49)
p. 49)
51