11.13
Lubricating the steering head bearing
11.14
Removing the start number plate
11.15
Installing the start number plate
11.16
Removing front fender
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated in
the course of removal and installation of the lower triple
clamp.
H02387-01
–
Remove screw
–
Unhook the start number plate from the brake line and remove
it.
S05336-10
–
Position the brake line in holders
plate.
–
Position the start number plate. Mount and tighten screw
The holding lugs engage in the fender.
S05337-10
Preparatory work
–
Remove the start number plate. (
SERVICE WORK ON THE CHASSIS 11
(
p. 53)
(
p. 53)
1
.
A
on the start number
p. 57)
1
.
57