Adjusting The Characteristic Map Of The Throttle Response - KTM 250 SX-F 2023 Owner's Manual

16 TUNING THE ENGINE
16.3
110
F03742-10

Adjusting the characteristic map of the throttle response

Info
On the throttle grip, the characteristic map of the throttle response is changed by changing the guide
plate.
A guide plate with a different characteristic map is supplied.
F03743-10
Main work
(All SX‑F models)
–
Move the handlebar to the straight-ahead position.
–
1
Push back sleeve
–
2
Loosen nut .
–
Turn adjusting screw
–
4
Loosen nut .
–
Push cold start button
–
Turn adjusting screw
moves to the basic position when the throttle grip is turned
to the front.
–
4
Tighten nut .
–
Turn adjusting screw
tle cable at the throttle grip.
Guideline
Play in throttle cable
–
2
Tighten nut .
–
1
Slide on sleeve .
–
Check the throttle grip for smooth operation.
Finishing work
–
Check the play in the throttle cable. (
Main work
–
1
Push back sleeve .
–
2
Remove screws and half-shells
–
Detach the throttle cables and take off the grip tube.
.
3
in as far as possible.
6
all the way to the stop.
5
so that the cold start button
3
so that there is play in the throt-
3 ... 5 mm (0.12 ...
0.2 in)
p. 109)
3
.