Table of Contents
Advertisement
Fuses
284
Open the hood.
X
Use a dry cloth to remove any moisture from
X
the fuse box.
To open: open clamps ;.
X
Fold cover : of the fuse box up in the direc-
X
tion of the arrow and remove it.
To close: check whether the seal is seated
X
correctly in cover :.
Insert both openings = at the rear of
X
cover : into the brackets on the fuse box.
The brackets on the fuse box must be com-
pletely visible in the two openings = on the
fuse box.
Fold down cover :.
X
Hook clamps ; into the fuse box and close.
X
Close the hood.
X
Fuse box in the rear
i
Observe the "Important safety notes" sec-
tion (
page 282).
Y
The fuse box in the rear is located on the right-hand
side when viewed in the direction of travel.
To open: open the seat belt guide on the
X
right-hand seat and remove the seat belt
(
page 97).
Y
Move the right-hand seat as far forward as
X
possible (
page 98).
Y
Insert your fingers at the bottom of front
X
cover ; between the cover and floor cover-
ing.
Remove front cover ; by pulling it forward in
X
the direction of the arrow.
Lift off top cover : by pulling it in the direc-
X
tion of the arrow.
Fuses = are accessible through the two open-
ings in the top of the fuse box.
To close: insert the securing tags underneath
X
top cover : in the recesses at the top of the
fuse box.
Fold down top cover : until it engages audi-
X
bly.
Insert the securing tags underneath top
X
cover ; in the recesses at the front of the
fuse box.
Push front cover ; towards the rear until it
X
engages audibly.
Move the right-hand seat backwards
X
(
page 98).
Y
Hook the seat belt into the seat belt guide on
X
the right-hand seat (
page 97).
Y
Advertisement
Table of Contents
