Table of Contents
Advertisement
inhale TIREFIT fumes. Keep tire sealant away
from children. There is a risk of injury.
If you come into contact with the tire sealant,
observe the following:
Rinse off the tire sealant from your skin
R
immediately with water.
If the tire sealant comes into contact with
R
your eyes, immediately rinse them thor-
oughly with clean water.
If tire sealant is swallowed, immediately
R
rinse your mouth out thoroughly and drink
plenty of water. Do not induce vomiting,
and seek medical attention immediately.
Immediately change out of clothing which
R
has come into contact with tire sealant.
If an allergic reaction occurs, seek medical
R
attention immediately.
!
Do not operate the tire inflation compressor
for longer than eight minutes at a time without
a break. It may otherwise overheat.
The tire inflation compressor can be operated
again once it has cooled down.
Comply with the manufacturer's safety instruc-
tions on the sticker on the tire inflation com-
pressor.
Using the TIREFIT kit
Do not remove any foreign objects which have
X
penetrated the tire, e.g. screws or nails.
Remove the tire sealant bottle, the accompa-
X
nying TIREFIT sticker and the tire inflation
compressor from the stowage well under-
neath the trunk floor (
page 270).
Y
Affix part : of the TIREFIT sticker to the
X
instrument cluster within the driver's field of
vision.
Affix part ; of the TIREFIT sticker near the
X
valve on the wheel with the defective tire.
Pull plug ? with the cable and hose A out of
X
the housing.
Screw hose A onto flange B of tire sealant
X
bottle :.
Place tire sealant bottle : head downwards
X
into recess ; of the tire inflation compres-
sor.
Remove the cap from valve C on the faulty
X
tire.
Screw filler hose D onto the valve.
X
Insert plug ? into the socket of the cigarette
X
lighter or into a 12 V power socket in your
vehicle.
Turn the SmartKey to position 1 in the ignition
X
lock (
page 122).
Y
Press on and off switch = on the tire inflation
X
compressor to I.
The tire inflation compressor is switched on.
The tire is inflated.
First, tire sealant is pumped into the tire. The
pressure can briefly rise to approximately
500 kPa (5.0 bar/73 psi).
Flat tire
273
Z
Advertisement
Table of Contents
