Mercedes-Benz SL 2018 Operator's Manual page 100

Seats
98
Observe the safety guidelines for seat belts
( page 42).
Y
To remove: open up magnetic head ; and
X
fold the tab up in the direction of the arrow.
Take the seat belt out of seat belt guide :.
X
To insert: fold the tab up in the direction of
X
the arrow.
Insert the seat belt back into the seat belt
X
guide and fold the tab back down.
Adjusting the head restraints
G
WARNING
You could lose control of your vehicle if you do
the following while driving:
adjust the driver's seat, head restraint,
R
steering wheel or mirrors
fasten the seat belt
R
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt
before starting the engine.
To adjust the head restraint height: slide
X
the switch for the head restraint adjust-
ment : up or down in the direction of the
arrow.
Moving the seats forward/back
G
WARNING
When you adjust a seat, you or other vehicle
occupants could become trapped, e.g. on the
seat guide rail. There is a risk of injury.
Make sure when adjusting a seat that no one
has any body parts in the sweep of the seat.
!
Make sure that there are no containers in
the cup holder and no objects in the footwell
or behind the seats when adjusting the seats.
Otherwise, you could damage the seats and
the objects.
You can move the seat forwards, in order to gain
better access to the rear compartment, e.g. to
reach the stowage compartment in the rear .
Remove the seat belt from the seat belt guide
X
( page 97).
Y
To move the seat forwards: press : on
X
switch :.
The seat moves automatically to the foremost
position.
To move the seat backwards: press 9
X
on switch :.
The seat moves back to the previous position.
To stop seat movement: press : or
X
9 in the opposite direction.
Adjusting the multicontour seat
You can adjust the multicontour seat using
COMAND (see Digital Operator's Manual).
Adjusting the active multicontour
seat
The active multicontour seat can be adjusted
using COMAND (see the Digital Operator's Man-
ual).
Adjusting the 4-way lumbar support
You can adjust the 4-way lumbar support using
COMAND (see the Digital Operator's Manual).