Table of Contents
Advertisement
Driving systems
176
"Reverse parking" function
Backing up straight into a parking space
without steering input
:
White guide line without steering input –
vehicle width including the exterior mirrors
(static)
Yellow guide line for the vehicle width
;
including the exterior mirrors, at the current
steering wheel angle (dynamic)
Yellow guide line at a distance of approx-
=
imately 3 ft (1.0 m) from the rear of the vehi-
cle
Red guide line at a distance of approximately
?
12 in (0.30 m) from the rear of the vehicle
Make sure that the rear view camera is
X
switched on (
The lane and the guide lines are shown.
With the help of white guide line :, check
X
whether the vehicle will fit into the parking
space.
Using white guide line : as a guide, carefully
X
back up until you reach the end position.
Red guide line ? is then at the end of the
parking space. The vehicle is almost parallel
in the parking space.
page 174).
Y
Reverse perpendicular parking with steer-
ing input
Parking space marking
:
Yellow guide line for the vehicle width
;
including the exterior mirrors, at the current
steering wheel angle (dynamic)
Drive past the parking space and bring the
X
vehicle to a standstill.
Make sure that the rear view camera is
X
switched on (
page 174).
Y
The lane and the guide lines are shown.
While the vehicle is at a standstill, turn the
X
steering wheel in the direction of the parking
space until yellow guide line ; reaches park-
ing space marking :.
Maintain the steering input and reverse care-
X
fully.
Yellow guide line for the vehicle width
:
including the exterior mirrors, at the current
steering wheel angle (dynamic)
Stop the vehicle when it is almost exactly in
X
front of the parking space.
The white lane should be as close to parallel
with the parking space marking as possible.
Advertisement
Table of Contents
