Settings; Map And Vehicle Settings; Enabling Maps - Garmin CAMPERCAM 795 Owner's Manual

Adding a Routine
1 From the Garmin PowerSwitch app, select
2 If necessary, select Add Routine.
3 Select When.
4 Select a trigger:
• To set a switch to trigger when your vehicle reaches a specific speed, select Speed > Next and follow the
on-screen instructions to enter speed thresholds.
• To set a switch to trigger at a specific time each day, select Time > Next and enter a time.
• To set a switch to trigger at sunrise, select Sunrise.
• To set a switch to trigger at sunset, select Sunset.
5 Select Add Action.
6 Select a device, a switch, an action and a button mode.
7 If necessary, use the slider to adjust the dimmer.
8 Select Save.
Editing a Routine
1 From the Garmin PowerSwitch app, select
2 Select on the routine you want to edit.
3 Select an option:
• To change the trigger for the routine, select When and select a trigger.
• To change an action, select on the action you want to change and update the action.
• To add an action to the routine, select Add Action and enter information about the action.
4 Select Save.
Deleting a Routine
1 From the Garmin PowerSwitch app, select
2 Select on the routine you want to delete.

Map and vehicle settings

Select > Map Display.
Map Vehicle Icon: sets the vehicle icon that represents your position on the map.
Driving Map View: sets the perspective on the map.
Map Detail: sets the level of detail on the map. More detail may cause the map to be drawn more slowly.
Map Theme: changes the colour of the map data.
Map Layers: sets the data that appears on the map page
Auto Zoom: automatically selects the zoom level for optimal use of your map. When disabled, you must zoom in
or out manually.
Skip Next Stop Confirmation: sets a confirmation message to appear when skipping a location on your route.
myMaps: sets which installed maps the device uses.

Enabling maps

You can enable map products installed on your device.
TIP: to purchase additional map products, go to garmin.com/maps.
1 Select > Map Display > myMaps.
2 Select a map.

Settings

> Routines.
> Routines.
> Routines.
Settings
(Customising the map layers, page 35).
49