Connecting The Device To Vehicle Power; Pairing With A Garmin Navigation Device - Garmin CAMPERCAM 795 Owner's Manual

Connecting the Device to Vehicle Power

Before you can connect the device to vehicle power, you must remove the warning tag from the +12V terminal
on the device.
You should always confirm all electrical connections are secure and will not come loose while operating the
device.
1 Connect the large ring end of the included ground wire
2 Connect the small ring end of the ground wire to the GND terminal
3 Connect the small ring end of the included 12-V cable to the +12V terminal
3
4 Tighten the / in. nut on the +12V terminal to a maximum torque specification of 4.52 N-m (40 lbf-in.).
8
You should confirm the nut cannot be loosened by hand.
Do not overtighten the +12V terminal to prevent damage to the terminal.
5 Connect the large ring end of the 12-V cable

Pairing with a Garmin Navigation Device

You can pair your Garmin PowerSwitch device with a compatible Garmin navigation device.
1 Turn on power to your Garmin PowerSwitch device and place your compatible Garmin navigation device
within 1 m (3.3 ft.) of it.
2 On your compatible navigation device, open the Garmin PowerSwitch app.
3 Follow the on-screen instructions to complete the pairing and setup process.
The main app dashboard appears. After the devices are paired, they connect automatically when they are turned
on and within range.
Appendix
to the negative terminal on the vehicle battery.
on the device.
NOTICE
to the positive terminal on the vehicle battery.
on the device.
65