Turning The Device On Or Off - Garmin CAMPERCAM 795 Owner's Manual

3 Plug the other end of the vehicle power cable
4 Fit the tab on the bottom of the mount into the slot
the mount until it clicks.

Turning the device on or off

• To turn the device on, press the power button
• To put the device in power saving mode, press the power button while the device is on.
While in power saving mode, the screen is off and the device uses very little power, but it can wake instantly
for use.
TIP: you can charge your device faster by putting it in power saving mode while charging the battery.
• To turn off the device completely, hold the power button until a prompt appears on the screen and select Off.
The prompt appears after five seconds. If you release the power button before the prompt appears, the
device enters power saving mode.
4
into a power outlet in your vehicle.
on the back of the device, and press the device into
, or connect the device to power.
Getting started