These trademarks may not be used without the express permission of Garmin. The Bluetooth logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. SD trademark of the SD Card Association.
Step 1: Mount the nüvi 1. Remove the clear plastic from the suction cup. Clean and dry your windshield and the suction cup with a lint-free cloth. 2. Place the suction cup on the windshield. 3. Plug the vehicle power cable into the power connector on the right side of the cradle.
Acquiring satellite signals may take a few minutes. The bars indicate GPS satellite strength. When one bar is green, the nüvi has acquired satellite signals. Now you can select a destination and navigate to it. Step 4: Use the nüvi ➊...
Following Your Route Your route is marked with a magenta line. As you travel, your nüvi guides you to your destination with voice prompts, arrows on the map, and directions at the top of the map. If you depart from the original route, your nüvi recalculates the route and provides new directions.
Using FM TMC Traffic noTe: Garmin is not responsible for the accuracy of the traffic information. The FM traffic receiver, which is integrated in the vehicle power cable, is included in some nüvi packages. The traffic receiver and the nüvi must be in data range of an FM station transmitting TMC (Traffic Message Channel) data to receive traffic information. For information about traffic receivers and coverage areas, go to www.garmin.com/traffic. noTe: Heated (metallized) windows could degrade the performance of the traffic receiver.
10 meters of each other. Pairing the nüvi with Your Mobile Phone 1. Confirm that your phone is supported by the nüvi. (Go to www.garmin.com /bluetooth.) 2. From the Menu page, touch Settings > Bluetooth 3. Enable the Bluetooth component on your phone and enable Find Me/Discoverable/ Visible mode.
If you forget your PIN and your > security location, you must send your nüvi and valid product registration or proof of purchase to Garmin to get your nüvi unlocked. Resetting the nüvi If the nüvi screen stops functioning, turn the nüvi off and on again.