Adjusting The Volume; Using The Audio Mixer; Adjusting The Screen Brightness; Vehicle Profiles - Garmin CAMPERCAM 795 Owner's Manual

Adjusting the volume

1 Select .
2 Select an option:
• Use the slider bar to adjust the volume.
• Select to mute the device.
• Select a tick box to enable or disable additional sound options.

Using the audio mixer

You can use the audio mixer to set the volume levels for different audio types, such as navigation prompts or
phone calls. The level for each audio type is a percentage of the master volume.
1 Select .
2 Select Audio Mixer.
3 Use the sliders to adjust the volume for each audio type.

Adjusting the screen brightness

1 Select > Display > Brightness.
2 Use the slider bar to adjust the brightness.
Entering your vehicle profile characteristics does not guarantee that your vehicle's characteristics will be
accounted for in all route suggestions or that you will receive the warning icons in all cases. Limitations may
exist in the map data such that your device cannot account for these restrictions or road conditions in all cases.
Always defer to all posted road signs and road conditions when making driving decisions.
Routing and navigation are calculated differently based on your vehicle profile. The activated vehicle profile
is indicated by an icon in the status bar. The navigation and map settings on your device can be customised
separately for each vehicle type.
When you activate a camper vehicle profile, the device avoids including restricted or impassable areas in routes
based on the dimensions, weight and other characteristics you entered for your vehicle.

Adding a vehicle profile

You should add a vehicle profile for each camper to be used with your device.
1 From the status bar, select the vehicle profile icon, such as
2 Select
3 Select your vehicle type:
• To add a motorhome with a permanently attached camper, select Motorhome.
• To add a motorhome pulling a trailer, select Motorhome with Trailer.
• To add a camper pulled behind a passenger vehicle, select With Trailer.
4 If necessary, select your trailer type:
• To add a camper pulled using a standard hitch, select Caravan.
• To add a camper pulled using a fifth-wheel hitch, select Fifth Wheel.
NOTE: this trailer type is not available in all areas.
• To add a boat trailer pulled using a standard hitch, select Boat Trailer.
• To add a trailer pulled using a standard hitch, select Caravan.
5 Follow the on-screen instructions to enter the vehicle characteristics.
After you add a vehicle profile, you can edit the profile to enter additional detailed information
profile, page 7).
6

Vehicle Profiles

WARNING
or .
(Editing a vehicle
Vehicle Profiles