D01 General Status; Figure 4-2 Example General Status Led (No Error) - Motorola DCT6400 Series Installation Manual

d01 General Status

This diagnostic displays system status information on the OSD and LED. The information is
updated each time the diagnostic is displayed.
ERROR:
PLATFORM ID:
FAMILY ID:
MODEL ID:
REMOD CHAN:
SETTOP TIME:
Figure 4-2
Example GENERAL STATUS LED (no error)
The General Status fields are:
Field Description
Error Error codes display on the LED and OSD when an error occurs. If multiple errors occur, the last
recorded error is displayed:
EP00 No error
EP01 Not connected
EP03 DRAM error
EP04 SRAM error
EP07 ROM verification failure
EP08 RAM test failure
EP09 Battery test failure
EP11 Invalid unit address
EP12 Power on self test failure
EP14 GITV startup failure
EP15 TSI structure corrupt
EP18 Driver initialization failure
Connected A DCT-operations connect or disconnect message determines whether the set-top is in the
State CONNECTED or DISCONNECTED state.
Platform ID A unique 16-bit hexadecimal number that identifies the platform image (also called the ROM ID).
Family ID The set-top manufacturer and product family, in hexadecimal format.
Model ID The set-top model, in hexadecimal format.
Remod Chan The interface from the set-top to the subscriber TV; channel 3 or 4 in the USA.
Settop Time The current OOB set-top time displayed in Global Positioning System (GPS) seconds from Jan 6,
1980. It is an integer from 0 to 4294967295.
GENERAL STATUS
EP00 CONNECTED
0x025E
0x0000
0X64CIA
03
xxxxxxxxxx GPS
P
MUTE MUTE
Environment code Error code
Diagnostics
DCT6400 Series Installation Manual
4-3