Invacare® TDX® SP2 Series
Disengage (PUSH) - Rotate the motor
l
locks UP to disengage the motors and
push the wheelchair.
Engage (DRIVE) - Rotate the motor
l
locks DOWN to engage the motors and
drive the wheelchair.
6.6 Disengaging/Engaging the Wheel Locks
WARNING!
Risk of Injury or Damage
Misuse of wheel locks may result in
injury or damage.
-DO NOT attempt to stop a moving
wheelchair with the wheel locks. Wheel
locks are not brakes.
-DO NOT use the wheel locks (if equipped)
when the wheelchair power is on. Invacare
recommends the use of wheel locks.
Use the wheel locks to hold the wheelchair in
place whenever the clutches are disengaged.
6.6.1 Engaging
1. Push handle A forward C away from tire B to
engage wheel lock D.
2. Repeat STEP 1 for opposite wheel.
6.6.2 Disengaging
1. Pull handle A back E toward tire B to
disengage wheel lock D.
2. Repeat STEP 1 for opposite wheel.
25
Fig. 6-11
60101831-I