Verifying Lan Communications; To Verify Lan Communications Using Ping - Agilent Technologies E5900B User Manual

1 Open an MS-DOS window or select Start©Run....
2 Enter the ping command followed by the IP address of the emulation
If You Have Problems If the response is something like "100% packet loss" or "Destination host

Verifying LAN Communications

Verify your emulation probe is now active and on the network by issuing a
ping or telnet command to the IP address.

To verify LAN communications using ping

These instructions assume you are using a PC running Microsoft
The procedure for other operating systems is slightly different.
probe.
Example
C:\WINDOWS>ping 192.35.12.6
Pinging 192.35.12.6 with 32 bytes of data:
Reply from 15.6.253.138: bytes=32 time=1ms TTL=254
Reply from 15.6.253.138: bytes=32 time=1ms TTL=254
Reply from 15.6.253.138: bytes=32 time=1ms TTL=254
Reply from 15.6.253.138: bytes=32 time<10ms TTL=254
unreachable", see "Problems with the LAN Interface" on page 145.
Emulation for the Motorola M•CORE
Connecting the Emulation Probe to a LAN
Verifying LAN Communications
® ®
Windows .
39