Ipower 9000 And Ipower 900 Systems; Ipower 600 System - Polycom iPower 600 User Manual

Chapter 3 - Tips for Tasks You Do Rarely

iPower 9000 and iPower 900 Systems

iPower 600 System

© Polycom, Inc.
To reinstall an iPower 9000 or iPower 900 system:
1. Do one of the following:
• For iPower 9000 systems, insert the CD marked Disk 1 of 2 into the
CD-ROM drive, and then power on the system.
• For iPower 900 systems, insert the boot diskette into the diskette drive and
the CD marked Disk 1 of 2 into the CD-ROM drive, and then power on the
system.
2. When you see the following dialog box, choose a language for the installation
and press . (Note that the text in this dialog box may be in English, even if
OK
your system is running in another language.)
3. Insert the CD marked Disk 2 of 2 when you see this dialog box instructing you
to insert the next media:
Press after you insert the second CD.
Enter
4. Follow the instructions on the screen, and restart the system to complete the
reinstallation.
If the system does not restart automatically after completing the upgrade, you
must restart it manually.
5. Copy your Local Directory data back to
To reinstall an iPower 600 system:
1. Power off the iPower 600 system.
C:\Program Files\PictureTel\vcs\tsdir.ini
.
29