Snmp Management; Global Management System - Polycom iPower 600 User Manual
Polycom ipower 600: user guide
Hide thumbs
Also See for iPower 600:
- Installation instructions manual (33 pages) ,
- Getting started manual (22 pages) ,
- Quick reference manual (2 pages)
Table of Contents
Advertisement
iPower Collaboration System Tips and Troubleshooting
SNMP Management
Global Management System
22
To enable SNMP management, you must do the following:
1.
Set up an SNMP environment.
To set up an SNMP environment, you must install network management
software (such as HP
network management station (NMS). You cannot use the iPower system as the
NMS.
2.
Install the iPower MIBs:
a.
Access the appropriate iPower system MIB file at one of these locations:
–
On the iPower system at
–
From the Polycom web site at
b. Install the MIBs on the network management station as required by your
management software.
For more information, see the management application's documentation.
c.
Using AdminTools, configure the iPower system for SNMP management.
For more information, see the AdminTools online help. To access this help,
press the
HELP
or click
when you are within the AdminTools application.
Help
3.
Add the iPower Network Manager.
Once you've configured the iPower system to allow remote management via
SNMP, you may choose to use the iPower Network Manager application,
which is available on the iPower Network Manager CD. This optional
application enhances HP OpenView or other network management software.
For information on how to use the iPower Network Manager application, see
the Network Manager online help. For information on how to use your SNMP
network management application to control a remote system, see the
documentation that came with the application.
The Polycom Global Management System is a web-based software application that
provides centralized video network management. As long as you have a web
browser, you can use the Global Management System with the iPower system to
monitor and maintain local and remote videoconferencing systems and networks
from anywhere in the world.
You can use the Global Management System with the iPower system to:
Monitor system status
Obtain general system information and addresses
®
OpenView) on the computer you intend to use as your
C:\Program Files\PictureTel\VCS\SNMP\Mib.
www.polycom.com.
button on the remote control, press
on the keyboard,
F1
www.polycom.com
Advertisement
Table of Contents
