Yaesu WIRES-X FT3DE Instruction Manual page 59

3. Touch the desired category.
The name of the node or room currently connected is added to the list of the
registered nodes and rooms.
If the selected category is already registered with the same node or room, a beep
sounds and it will not register.
4. Press the [BACK] key twice to return to the connection screen.
 FTM-500D
1. Rotate the FUNC knob to select the node or room and then press the FUNC knob.
Displays the category list.
2. Rotate the FUNC knob to select the desired category and then press the FUNC
knob.
The name of the node or room currently connected is added to the list of the
registered nodes and rooms.
If the selected category is already registered with the same node or room, a beep
sounds and it will not register.
3. Press the [BACK] key to return to the connection screen.
 FTM-400XD/D
1. Touch the node or room be connect to.
Displays the category list.
2. Touch the desired category twice.
The name of the node or room that is currently connected, is added to the list of
the registered nodes and rooms.
If the selected category is already registered with the same node or room, a beep
sounds and it will not register.
3. Press the [BACK] key to return to the connection screen.
58
C1:TOKYO AREA
C2:FISHING
C3:----------------
C4:----------------
C5:----------------
C1:TOKYO AREA
JA1YOE-ROOM-A 15
JQ1YBG-ND YOKOHAMA
JA1YOE-ROOM12345 2
JQ1YBG-ND Shinagawa-
SEARCH & DIRECT
JA1YOE-ROOM12345
JA1YOE-ROOM12345
C1:TOKYO
C2:FISHING
C3:
C4:
C5:
2