Yaesu WIRES-X FT3DE Instruction Manual page 48

If connection destinations with the foreword of the ID matching the entered ID
are found, they will be listed.
• The number of matches with the searched character string is displayed as
"JA1Y" → 24.
• Connection destinations are displayed from the room list and then node list.
• On the connection destination room columns, the number of activities (the
number of nodes connected to each room) appears on the right side.
• If there is no connection destination matching the entered name, "No Matches"
appears and then the screen returns to the character input screen.
• If the entered ID is found, the transceiver establishes connection immediately.
5. Rotate the FUNC knob to select a node or room and press the FUNC knob to
start connection.
• Once connection is successfully established, "Connected" will appear on the
LCD.
• If connection is unsuccessful, an error message appears and the screen
returns to the list of nodes and rooms.
③ Connecting to registered nodes or rooms to the category list
1. When the local node is displayed in the upper row, rotate the FUNC knob to
select [SEARCH & DIRECT] and press the FUNC knob.
Displays the category list.
2. Rotate the FUNC knob to select the category [C1] to [C5] and then press the
FUNC knob.
Displays the node and room lists.
• For details on registering nodes and rooms, see "Registering the connected
node or room in the category list" (page 57).
• Connection destinations are displayed from the room list and then node list.
• On the connection destination room columns, the number of activities (the
number of nodes connected to each room) appears on the right side.
Items may be listed in order according to the number of activities, or access
history from Setup Menu → [65 SEARCH SETUP].
3. Rotate the FUNC knob to select the node or room and then press the FUNC
knob to start a connection.
• Once connection is successfully established, "Connected" will appear on the
LCD.
• If connection is unsuccessful, an error message appears and the screen
returns to the list of nodes and rooms.
④ Connecting to the node or room you have most recently connected
1. If a node or room has been connected on the Internet before, the last connected
node or room will blink at the bottom of the screen.
• Rotate the FUNC knob to select the blinking node or room and press the
FUNC knob or the PTT switch to start connection.
• If connection is unsuccessful, an error message appears and the name flash-
es again.
47
"JA1Y" 24
JA1YOE-TKY-ROOM 42
JA1YOE-ROOM-A 31
JA1YOE-ROOM-B 16
JA1YOE-ROOM-C
JA1YOE-ND1
JA1YOE-TKY
JQ1YBG-ND Shinagawa-
SEARCH & DIRECT
CATEGORY
ALL
SEARCH & DIRECT
C1:TOKYO
C2:FISHING
C3:
C4:
C1:TOKYO
CQ-JAPAN 123
JA1YOE-TKY-ROOM 42
JQ1YBG-ND Shinagawa-
SEARCH & DIRECT
JA1YOE-ROOM12345
1