Yaesu WIRES-X FT3DE Instruction Manual page 22

 FTM-300DR/DE or FTM-200DR/DE
1. Press and hold the [D X] key and the [POWER] switch to turn the transceiver ON.
"WIRES-X PDN" is displayed on the LCD screen.
2. Press the [A/B] key to select "Access Point" or "Direct Operation".
Depending on the operation mode chosen, the display will show as follows:
Access Point:
Direct Operation:
 FTM-100DR/DE
1. Press and hold the [D X] key and the [POWER] switch to turn the transceiver ON.
"PDN" is displayed on the LCD screen.
2. Press the [A/B](DW) key to select "Access Point" or "Direct Operation".
Depending on the operation mode chosen, the sub frequency display will show as follows:
Access Point:
Direct Operation:
• To return the transceiver to the normal mode, repeat procedure 1 above.
• To switch between "Portable Digital Node Mode" and "Portable HRI Mode", start with the normal mode first and then
perform the above operation.
• The portable station transceiver cannot use the News Station feature or the GM feature.
" （ Frequency display） "
"DIRECT"
" （ Frequency display） "
"DIRECT"
21