User Parameter Setting - Toyotomi hydria+ Owner's Manual

In this case, the controller is locked and any touch operation does not work. By touching
the controller will be unlocked and touch operation will work. However, the setting of "Child Lock" will remain to be
"On", and if there is no any operation in 30 seconds, the controller will be locked again.

2.3 User Parameter Setting

[Operation Instructions]
2.At the menu setting page, by touching the page turning keys, it is able to switch to the page where the desired
parameter is.
[Notes]
also will change as the corresponding condition changes.
No Full Name
Leaving water
1 temperature for
cooling(T1)
GB
Operation Instructions for the Compact Type ATW Heat Pump
", this function will be really disenabled.
PARAMETER", it will back to the parameter setting page, as shown in the
Parameter Setting Page
OK" and then the unit will run based on this setting. While this
Cancel".
Parameter Setting
Displayed Range
(°C)
Name
WOT-Cool
Range
Default
(°F)
18℃ /64°F
18℃ /64°F
18
hydria +
for six seconds,
Remarks
Unavailable to heating
only units
Applicable to the
second generation
Monobloc series units