Viewing - Toyotomi hydria+ Owner's Manual

closed (230VAC) under the DHW(Hot water) mode and opened under the cooling/heating mode.
2.4.20 Parameter Setting
[Operation Instructions]
below.
At this page, select the desired option and then go to the corresponding page.
Cancel", this setting will not be saved and quit.
Display
No Full Name
Name
1 T-HP max T-HP max
[Notes]
corresponding default also will change.

2.5 Viewing

[Operation Instructions]
below.
2.5.1 Status Viewing
[Operation Instructions]
VIEW
Operation Instructions for the Compact Type ATW Heat Pump
Without", "DHW", and "AIR
Page of Commissioning Parameters
OK", this setting will be saved and then the unit will run based on this setting; or by
Range
VIEW
VIEW Page
Status
AIR", it will be closed (230VAC)
PARAM.", it will access to the pages as shown
Default
50℃ /122°F It is unavailable to mini chillers.
29
hydria +
DHW", it will be
Remark
GB