Toyotomi hydria+ Owner's Manual page 30

No Full Name
1 Status of the compressor
2 Status of the fan
3 Status of the unit
4 Status of the water pump
5 Status of the water tank heater
6 Status of the 3-way valve 1
7 Status of the 3-way valve 2
Status of the compressor crankcase
8
heater
9 Status of the heater 1 for the main unit
10 Status of the heater 2 for the main unit
11 Status of the Chassis heater
12 Status of the heat exchanger heater
13 Status for the system defrosting
14 Status of the system oil return
15 Status of the thermostat
16 Status of other thermal source
17 Status of the 2-way valve
18
19 Status of the door guard
20 Status of the 4-way valve
21 Status of disinfection
22
23 Status of the tank pump
2.5.2 Parameter Viewing
[Operation Instructions]
VIEW
GB
Operation Instructions for the Compact Type ATW Heat Pump
Status View Page
Viewable Status
Displayed Name
Compressor
Fan
Unit status
HP-pump
Tank heater
3-way valve 1
3-way valve 2
Crankc. heater
HP-heater 1
HP-heater 2
Chassis heater
Plate heater
Defrost
Oil return
Thermostat
Other thermal
2-way valve
HP-Antifree
Gate-Ctrl.
4-way valve
Disinfection
Flow switch
Tank pump
Parameter", it is able to view each parameter of the unit, as shown in the
30
Status
the heating only unit.
NA
water/Cool+hot water/
the heating only unit.
Heat+hot water
Card in/Card out
hydria +
Remarks
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/