Commissioning Parameter Setting - Toyotomi hydria+ Owner's Manual

No Full Name
Leaving water
2 temperature for
heating (T2)
Room temperature
3
for cooling (T3)
Room temperature
4
for heating (T4)
Water tank
5
temperature(T5)
Leaving water
temperature
6
Leaving water
temperature
7
Leaving water
temperature
8
Room temperature
9

2.4 Commissioning Parameter Setting

[Operation Instructions]
window, the commissioning parameter page will be accessed, where the left side is for the function setting and the
[Notes]
automatically save this change and this change will remain upon power failure.
Operation Instructions for the Compact Type ATW Heat Pump
Displayed Range
(°C)
Name
WOT-Heat
RT-Cool
RT-Heat
T-water tank
temp
Commission" and then entering the correct password (000048) in the pop-up
Range
Default
(°F)
45℃ /113°F
45°C/113°F
45°C/113°F
24°C/75°F
20°C/68°F
50°C/122°F
5°C/41°F
10°C/50°F
5°C/41°F
2°C/36°F
19
hydria +
Remarks
High-temp series units
Normal-temp series
units
Applicable to the
second generation
Monobloc series units
Unavailable to heating
only units
/
Unavailable to mini
chillers
Unavailable to mini
chillers
/
Unavailable to mini
chillers
/
GB