Related Manuals for Planar EL640.400-C2
Summary of Contents for Planar EL640.400-C2
- Page 1 EL640.400-C2, -C3 and –CD3 640 x 400 Pixel Displays USER’S MANUAL www.planar.com For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998.
- Page 2 Revision Control Date Description January 1998 Document number P002194 Ver 5 June 2004 Document number 020-0355-00A For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998.
-
Page 3: Table Of Contents
Contents Product Profile ................................3 EL Technology................................3 Electrical Characteristics............................4 Connector Layout ..............................4 Input to the Display..............................5 Control Basics .................................6 Power Input................................6 Connectors ................................6 Signal Inputs ................................6 Jumper Description..............................7 Input Specifications..............................7 Display Features .................................8 Display Operation Modes...........................8 Supported Timing Modes ..........................9 Display Enable................................9 200 Rows Mode..............................10 Two Bit Parallel Data ............................10 Brightness Control ..............................10... - Page 4 Figure 6. Setup and Hold Timing........................15 Figure 7. Viewing Area Characteristics ......................19 Figure 8. EL640.400-C2, -C3 and CD3 Back and Side Views ..............20 Figure 9. EL640.400-C2 FRA, -C3 FRA and CD3 FRA Back and Side Views........21 Tables Table 1. Input to the Display ..........................5 Table 2.
-
Page 5: Product Profile
The two displays are mechanically identical. The EL640.400–C2, –C3 and –CD3 are timing compatible with Planar EL640.400–CB series displays and signal compatible with VGA Feature Connector supporting the 350 and 400 line standard VGA modes. They may be driven at frame rates up to 80Hz. -
Page 6: Electrical Characteristics
DC/DC converter. Electrical Characteristics Connector Layout Fig 2. Input Connectors and Jumpers and their location. EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998. -
Page 7: Input To The Display
Luminance LUMPOT2 Pot.2 Reserved Reserved for future use. Reserved Reserved for future use. EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998. -
Page 8: Control Basics
Connector J3 containes input for external luminance control it can be left disconnected if its function is not needed. EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998. -
Page 9: Jumper Description
The minimum and maximum specifications in this Operations Manual should be met, without exception, to ensure the long-term reliability of the display. Planar does not recommend operation of the display outside these specifications. EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) -
Page 10: Display Features
EL640.400–C2, –C3 and –CD3 have two input timing modes. VGA Mode supports standard 200, 350 and 400 row VGA modes and Normal Mode is similar to Normal Mode in most Planar displays. Timing mode is determined from combination of the polarities of the VS and HS pulses and the _BLANK signal at the rising edge of the VS pulse and the polarities of VS and HS pulses at the rising edge of the _BLANK pulse. -
Page 11: Supported Timing Modes
2W. In normal operation the ENABLE input should be pulled HIGH or left disconnected (internal pull-up). EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998. -
Page 12: 200 Rows Mode
This function is selected by removing jumper PS2/2 (F2040). The _BLANK input must also be in LOW state. For more information of this mode contact Planar. Two Bit Parallel Data To reduce the input data frequency in NORMAL mode the Video data can be input two bits per clock cycle. -
Page 13: Installation And Handling
Ω could be placed at each of the four signal line outputs of the transmitter in order to lower signal reflections. Electrostatic Caution: Planar display use CMOS and power MOS-FET devices. These components are electrostatic sensitive. Unpack, assemble and examine this assembly in a staticcontrolled area only. -
Page 14: Video Input Timing
T9 Horizontal Back Porch tVCLK T10 Horizontal Border tVCLK VCLK pulses / HS HS period 31.8 31.8 31.8 µs EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998. -
Page 15: Table 7. Video Input Timing, 400 Row Vga Modes
T9 Horizontal Back Porch tVCLK T10 Horizontal Border tVCLK VCLK pulses / HS HS period 31.8 31.8 31.8 31.8 µs EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998. -
Page 16: Table 8. Video Input Timing - 640 Columns X 400 Rows
1) Needed to display the last row and to change the frame. 2) Only rising edge is used. 3) If vertical positioning is needed, please contact Planar. 4) If horizontal positioning is needed, please contact Planar. 5) Video Clock VCLK should be kept running. -
Page 17: Setup And Hold Timing
0+, 1+ 70.62 14.161 0, 1, 0*, 1*, 4, 5, D, 13 79.43 12.588 NORMAL Min 33 Max 30 EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998. -
Page 18: Operational Specifications
The display will not inhibit the end product from obtaining any of the following specifications: UL544, IEC 950 EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998. -
Page 19: Optical
The anti-reflective coating on the filter should face the user. EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998. -
Page 20: Mechanical Characteristics
Note that this may slightly increase the total depth of the design. EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998. - Page 21 Fig 7. Viewing Area Characteristics. EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998.
- Page 22 EL640.400–C2, –C3 and –CD3 Back Fig 8. and Side Views. Dimensions in mm. EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998.
- Page 23 EL640.400–C2 FRA, –C3 FRA and –CD3 FRA Back Fig 9. and Side Views Dimensions in mm. EL640.400-C2, -C3 and –CD3 Operations Manual (020-0355-00A) For ordering information of el640-400-c3 and other EL Displays, please visit http://www.eldisplays.com/el640-400-c3/ or call +1-888-394-4998.
-
Page 24: Description Of Warranty
TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Easy to Use There are many options available which make Planar flat panel displays easy to use, easy to interface, and easy to package. Call Planar for complete information. -
Page 25: Support And Service
Support and Service Planar is a US company based in Beaverton, Oregon and Espoo, Finland with a worldwide sales distribution network. Full application engineering support and service are available to make the integration of Planar displays as simple and quick as possible for our customers. - Page 26 Tel: +358-9-420-01 Hours: M-F, 7:00am - 4pm CET © 2004 Planar Systems, Inc. 06/04 Planar is a registered trademark of Planar Systems, Inc. ICE, ICEBrite, and ICEPlus are trademarks of Planar Systems, Inc. Other brands and names are the property of their respective owners.