Hardware Options Problems - Lexmark MX-C407P User Manual

Troubleshooting
Action
Step 3
Check if the flash drive is supported. For more information, see
"Supported flash drives and file types" on page
Is the flash drive supported?
Step 4
a
Check if the USB port is enabled. For more information, see
"Enabling the USB port" on page
b
Remove, and then insert the flash drive.
Does the printer recognize the flash drive?
Enabling the USB port
From the control panel, navigate to:
Settings > Network/Ports > USB > Enable USB Port
For non-touch-screen printer models, press
Checking the printer connectivity
1
Print the Network Setup Page.
From the control panel, navigate to:
Settings > Reports > Network > Network Setup Page
For non-touch-screen printer models, press
2
Check the first section of the page and confirm that the status is connected.
If the status is not connected, then the LAN drop may be inactive or the network cable may be unplugged
or malfunctioning. Contact your administrator for assistance.

Hardware options problems

Defective flash detected
Contact your dealer.
Not enough free space in flash memory for resources
Contact your dealer.
30.
103.
to navigate through the settings.
to navigate through the settings.
Yes No
Go to step 4. Insert a supported
flash drive.
The problem is Contact your dealer.
solved.
103