Table of Contents
Advertisement
encleaning and care
Clean drain pump
Precondition:The drain pump is
empty. → page 38
Since there may still be residual
1.
water in the drain pump, carefully
unscrew the pump cover.
Coarse contamination can cause
‒
the filter insert to get stuck in
the pump housing. Loosen dirt
and remove filter insert.
Clean the interior, the threads of the
2.
pump cover and the pump housing.
The pump cover consists of two
components that can be
disassembled for cleaning.
e create that
Itself
3.
e
r lyepu
wheel d
leaves.
40
the wing
turn mpe
Install the pump cover.
4.
Ensure that the pump cover
‒
components are assembled
correctly.
Screw the pump cover on as far as
5.
it will go.
90°
The handle of the pump cover
must be vertical.
Insert and close the maintenance
6.
flap.
2
1
Advertisement
Table of Contents
