Bosch WGG244A20 Instructions For Use And Assembly page 16

enSet up and connect
Connect the water inlet hose to the
1.
device.
Connect the water inlet hose to the
2.
tap (26.4 mm = 3/4").
Open the tap carefully and check
3.
whether the connection points are
tight.
Connection types water drainage
The information will help you to
connect this device to the water drain.
ATTENTION!
When pumping out, the water drain
hose is under pressure and can detach
from the installed connection point.
the water drain hose against
▶
accidental L
16
secure eyelets.
A notice:Note the pump heights.
The maximum pumping height is 1
bathroom sink
plastic pipe
with rubber sleeve
or gully
The connection
place with one
hose clamp
(24-40 mm)
chern.
the water
running hose with
a manifold
→ page 30 fix and
secure.
the water
running hose with
a manifold
→ page 30 fix and
secure.