External Storage Flexbay (Solid-State Drive); Removing The External Solid-State Drive Assembly - Dell Precision 5860 Tower Service Manual

Steps
1.
NOTE: 2.5 inch hard-drives are to be installed in hard-drive assemblies with an adapter installed to fit 2.5 inch hard-
drives.
Place the hard drive into the external hard-drive bracket and align the pins on the bracket with the slots on the hard drive.
2. Snap the hard-drive into the external hard-drive bracket.
Next steps
1. Install the hard-drive assembly.
2. Follow the procedure in

External storage flexbay (Solid-state drive)

Removing the external solid-state drive assembly

Prerequisites
1. Follow the procedure in
About this task
The following images indicate the location of the external solid-state drive assembly and provide a visual representation of the
removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 25