Removing The Left Rail-Kit - Dell Precision 5860 Tower Service Manual

Steps
1. Remove the four screws (M6x32) from the rail-kit.
2. Align the right rail-kit with the slots on the chassis and slide to secure it in place.
3. Replace the four screws (M6x32) to secure the right rail-kit to the chassis
Next steps
1. Install the side cover.
2. Follow the procedure in

Removing the left rail-kit

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
110 Removing and installing components
After working inside your
Before working inside your
computer.
computer.