Steps
1. Position the front bezel to align the tabs on the bezel with the slots on the chassis.
2. Press the bezel until the tabs clicks into place.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
I/O board
Removing the front I/O bracket
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
About this task
The following images indicate the location of the front I/O bracket and provide a visual representation of the removal procedure.
18
Removing and installing components
After working inside your
Before working inside your
computer.
computer.