Hard Drive - HP ProBook 4435s Maintenance And Service Manual

Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket and screws.
Description
750-GB, 7200-rpm hard drive
750-GB, 5400-rpm hard drive
640-GB, 5400-rpm hard drive
500-GB, 7200-rpm hard drive
500-GB, 5400-rpm hard drive
320-GB, 7200-rpm hard drive (7 mm)
320-GB, 7200-rpm hard drive (2.5 in)
320-GB, 5400-rpm hard drive (7 mm)
320-GB, 5400-rpm hard drive (2.5 in)
250-GB, 7200-rpm hard drive (2.5 in)
250-GB, 7200-rpm hard drive (7 mm)
250-GB, 5400-rpm hard drive (2.5 in)
250-GB, 5400-rpm hard drive (7 mm)
Hard Drive Hardware Kit (includes hard drive bracket, insulator, and screws)
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the bottom door (see
Remove the hard drive:
1. Position the computer upside-down, with the battery bay toward you.
2. Remove the four Phillips PM2.5×5.0 screws (1) that secure the hard drive to the computer.
3. Grasp the Mylar tab on the hard drive and slide the hard drive to the right (2) to disconnect it
from the system board connector.
44 Chapter 4 Removal and replacement procedures
Battery on page 40).
Bottom door on page 41).
Spare part number
633252-001
634250-001
603785-001
634925-001
634932-001
634862-001
641672-001
645193-001
622643-001
635225-001
634861-001
622641-001
645191-001
647944-001