8.
Lift the keyboard connector latch (1), and then disconnect the keyboard cable from the system
board (2).
9.
Remove the keyboard.
Reverse this procedure to install the keyboard.
Top cover
Description
Top cover or use in models with a fingerprint reader
Top cover or use in models with a fingerprint reader without a USB logo
Top cover or use in models without a fingerprint reader
Top cover or use in models without a fingerprint reader without a USB logo
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
64
Chapter 4 Removal and replacement procedures
Spare part number
646335-001
667662-001
646337-001
667663-001