4.
Lift the side of the board (3), slide it out from under the tab, and then remove the board from the
computer. (4)
Reverse this procedure to install the Quick Launch board.
Speaker assembly
Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Bottom door (see
b.
Hard drive (see
78
Chapter 4 Removal and replacement procedures
Battery on page
40).
Bottom door on page
Hard drive on page
44)
41).
Spare part number
646364-001