Table of Contents
Advertisement
Cleaning the steam wand
Clean the steam wand after every use to avoid the build-up of milk residue and prevent it
from clogging.
Wash all parts of the spout thoroughly with a sponge and warm water.
1
2
3
Replace all components. Insert the steam connection nozzle, then the steam wand spout by
pushing it upwards and turning it clockwise until firmly in place.
42
CARE AND CLEANING
Place a container under the steam wand
and dispense a small amount of water.
Wait a few minutes for the spout to cool
down, then extract.
Hold the spout with one hand and with the
other, turn the end of the spout and pull
it downwards.
Remove the steam connection nozzle by
pulling it downwards.
Check the hole in the connection nozzle is
not blocked. If necessary, clean using
a toothpick.
Advertisement
Table of Contents
