Installation Setup; Fixed Way; Am-Esp-E050-Xxxx/Am-Esp-E030-Xxxx Models - Delta E Series Installation And Maintenance Instructions Manual
Servo press
Hide thumbs
Also See for E Series:
- Software instructions (25 pages) ,
- Operation and installation manual (73 pages)
Table of Contents
Advertisement
Delta Electronics Servo Press E-Series Installation and Maintenance Instructions
3. Installation Setup
3.1
Fixed Way
3.1.1
AM-ESP-E050-XXXX/AM-ESP-E030-XXXX models
The fixed servo press is installed with a flange. The fastening ports are shown in the figure below.
Please use 8 general M12X1.75 hex screws (JIS strength is 12.9, length 60) and apply the tightening
torque of 1160 kgf-cm.
Caution: Please note that the equipment has to be closely attached to the locking and fastening
platform while fastening the servo press.
Suggested digging size
: Locking and fastening site
5
Advertisement
Table of Contents
