Product Overview; Controls - Toro 30873TE Operator's Manual

Table of Contents

Advertisement

Product Overview

Controls

1. Brake pedal
2. Pedal-locking latch
3. Parking-brake pedal
Traction Pedal
The traction pedal
(Figure
reverse operation. Press the top of the pedal to move
forward and the bottom to move backward.
To stop the machine, use 1 of the following
procedures:
Reduce your foot pressure on the traction pedal
and allow it to return to the center position. The
machine dynamically brakes to a smooth stop.
Tap or hold the reverse pedal briefly. This stops
the machine faster than dynamic braking.
Note:
In emergency braking situations, press the
service brake pedals in addition to using the reverse
pedal as stated above. This is the quickest way to
stop the machine.
Brake Pedals
There are 2 foot pedals that operate individual wheel
brakes for turning assistance, parking, and to aid in
better side-hill traction. A latch connects the pedals
for parking-brake operation and transport
Pedal-Locking Latch
The pedal-locking latch connects the pedals together
to engage the parking brake
Parking-Brake Pedal
To engage the parking brake,
pedals together with the pedal-locking latch and push
Figure 10
4. Traction pedal
5. Tilt-steering pedal
10) controls forward and
(Figure
(Figure
10).
(Figure
10) connect the
down on the right brake pedal while engaging the toe
pedal. To release the parking brake, press 1 of the
brake pedals until the parking brake latch retracts.
Tilt-Steering Pedal
To tilt the steering wheel toward you, press the foot
pedal down, pull the steering tower toward you to
the most comfortable position, and release the pedal
(Figure
10). To move the steering wheel away from
you, press the foot pedal and release it when the
steering wheel reaches the desired operating position.
Key Switch
The key switch
g009979
O
/P
, and S
N
REHEAT
1. Lift switches
(Groundsmaster 4700
machine only)
2. Lift switch (Groundsmaster
4500 and 4700 machines)
3. PTO switch
4. Key switch
10).
1. Power-point switch
16
(Figure
11) has 3 positions: O
.
TART
Figure 11
5. InfoCenter
6. Hi-Lo speed control
7. Engine-speed switch
8. Light switch
Figure 12
2. Cruise-control switch
,
FF
g020433
g028454

Advertisement

Table of Contents
loading

Table of Contents