Installing The Air Filter; Preparing Air Filter Box Cover For Securing; Removing The Main Silencer - KTM 250 SX 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.26
11.27
11.28
60

Installing the air filter

102178-10
K01186-10

Preparing air filter box cover for securing

S02308-10

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Main work
–
Mount the clean air filter on the air filter support.
–
Grease the air filter in area
Long-life grease ( p. 126)
–
Insert the air filter and position the top retaining pin
B
bushing .
The air filter is correctly positioned.
–
Secure the bottom retaining pin with holding tab
Info
If the air filter is not mounted correctly, dust and dirt
may enter the engine and result in damage.
Finishing work
–
Install the air filter box cover. (
Preparatory work
–
Remove the air filter box cover. (
Main work
–
A
Drill a hole at marking
Guideline
Diameter
Finishing work
–
Install the air filter box cover. (
A
.
1
2
.
p. 58)
p. 57)
.
6 mm (0.24 in)
p. 58)
in