Removing The Start Number Plate; Installing The Start Number Plate; Removing Front Fender; Installing Front Fender - KTM 250 SX 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.14
11.15
11.16
11.17
52

Removing the start number plate

F00012-10

Installing the start number plate

F00013-10

Removing front fender

M01144-10

Installing front fender

M01144-10
–
1
Remove screw .
–
Disconnect the brake line at the start number plate. Take off
the start number plate.
–
Connect the brake line at the start number plate.
–
Position the start number plate.
The holding lugs engage in the fender.
–
Mount and tighten screw
Preparatory work
–
Remove the start number plate. (
Main work
–
1 2
Remove screws and
Main work
–
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
Finishing work
–
Install the start number plate. (
1
.
p. 52)
. Remove front fender.
1
and
M6 10 Nm (7.4 lbf ft)
p. 52)
2
.