Removing The Seat; Mounting The Seat - KTM 250 SX 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.20
11.21
56
V01525-11

Removing the seat

K01133-10
H02218-10

Mounting the seat

H02218-11
–
Position the left frame protector.
–
Insert the right frame protector from below and push to the
rear.
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount and tighten screw
Guideline
Screw, frame protec-
tor
–
Mount the new cable ties.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Remove screw .
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is locked in correctly.
7
with the washers.
M5 3 Nm (2.2 lbf ft)
8
.
M5 3 Nm (2.2 lbf ft)
p. 44)