Installation; Mounting Location - Siemens SITRANS LR460 HART Operating Instructions Manual

Installation

WARNINGS:
• SITRANS LR460 is to be used only in the manner outlined in this manual,
otherwise protection provided by the equipment may be impaired.
• Installation shall only be performed by qualified personnel and in
accordance with local governing regulations.
Notes:
• For European Union and member countries, installation must be according to ETSI
EN 302372.
• Refer to device nameplate for approval information.
• Use appropriate conduit and conduit fittings or cable glands, to maintain IP or NEMA
rating.
• Observe all maximum permissible ambient and process temperatures. Refer to
Maximum Process Temperature Chart
• For US and Canadian installations, see

Mounting Location

Notes:
• Provide easy access for viewing the display and programming via the handheld
programmer.
• Provide an environment suitable to the housing rating and materials of construction.
• Provide a sun shield if the device is mounted in direct sunlight.
ambient temperature
max. +65 °C (+149 °F)
A5E42035355
on page 96.
FCC, RED and IC Conformity
SITRANS LR460 – INSTRUCTION MANUAL
on page 2.
flange
temperature
process temperature
max. +200 °C (+392 °F)
Page 13