Advertisement
3.27
Setting kilometers or miles
Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.
3.28
Setting the combination instrument
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button
The Setup menu is displayed and the active functions are
shown.
–
Repeatedly press the button
Adjusting the Km/h
–
Press the button
Adjusting the Mph
400329-01
–
Press the button
–
Wait 3 - 5 seconds.
The settings are stored.
Info
If no button is pressed for 10–12 seconds, or if an
impulse comes from the wheel speed sensor, the
settings are automatically saved and the setup menu is
closed.
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button
The Setup menu is displayed and the active functions are
shown.
Info
If no button is pressed for 10–12 seconds, the settings
are automatically saved.
400318-01
If no button is pressed for 20 seconds, or if an impulse
comes from the wheel speed sensor, the settings are
automatically saved and the setup menu is closed.
–
Repeatedly press the button
tion flashes.
The selected function flashes.
briefly until H appears at the
for 2–3 seconds.
briefly until Km/h/Mph flashes.
.
.
briefly until H appears at the
for 2–3 seconds.
briefly until the desired func-
WORK 3
39
Advertisement
