3.16
Connecting the negative cable of the 12-V battery
3.17
Charging the 12-V battery (All EU/US/ASEAN/CN models)
Warning
Risk of injury 12 V batteries contain harmful substances.
–
Keep 12 V batteries out of the reach of children.
–
Keep sparks and open flames away from 12 V batteries.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
–
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of 12 V batteries with less than the minimum voltage correctly.
Note
Danger of damage An incorrectly selected charging mode will damage the 12-V battery.
–
Always select a charging mode that is compatible with the type of battery.
Note
Environmental hazard 12 V batteries contain environmentally hazardous materials.
–
Do not dispose of 12 V batteries as household waste.
–
Dispose of 12 V batteries at a collection point for used batteries.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Main work
–
Connect negative cable
Guideline
Screw, battery termi-
nal
Contact disk
3
cable lug
T02638-10
Finishing work
–
Mount the seat. (
1 m (3 ft)
9 V
1
of the 12-V battery.
M5
2.5 Nm
(1.84 lbf ft)
A
must be mounted under screw
with the claws toward the battery terminal.
p. 26)
WORK 3
2
and
31