KTM 350 EXC-F 2022 Setup Instructions page 28

3 WORK
3.11
3.12
26
S01321-10
Removing the seat
S03480-10
H02218-10
Mounting the seat
H02218-11
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
1
Remove screw .
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Mount the front of the seat on the collar bushings of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure the seat is locked in correctly.
2
.
M6 10 Nm (7.4 lbf ft)
p. 21)
p. 22)